If you are facing error code B0605 on your HP Laser Jet printer and you are not aware of the correct resolution of the problem, then avail HP Tech Help Support from the experts. The error code indicates that the print cannot boot up into the ready state with an error message shown on the printer control panel. The series of error code appears more frequently on HP printer that needs to be fixed instantly. The error simply means that the firmware of your printer has been crashed. Therefore, the print won’t work perfectly or accordingly.
Here, find out the solution steps that can help you to troubleshoot the error B0605 series on your own-
Case 1: Driver is previously installed on Computer
- Locate the printer in the boot code mode with the following steps-
- Hold down the “Cancel” option and “OK” buttons.
- Turn on your printer.
- Hold down buttons continuously until control panel display HP on the first line and Boot code on the second line.
- Make sure that the connection of the printer with the computer via USB cable is perfectly done and then run HP LJ P2055 Firmware Update Utility.
- From the dropdown list, choose the HP LaserJet P2050 series printer and then click “Send Firmware” button.
Once you complete the above steps, you need to check the control panel of the printer and check “Downloading Update Data” is displayed on control panel followed by Programming App Flash. Wait until the upgrade utility gets finished. Here, your printer would get restarted automatically and the display of control panel would show ready.
Here the firmware is completely ready and recovered but still you encounter the same error code then you better contact HP Tech Support Services or continue with the following steps-
Case 2: Driver Is Not Previously Installed
Here, you need to install the driver for HP LaserJet printer-
- First of all you need to insert printer installation CD.
- In Windows OS, you need to go to the “Start”, Setting, and Printers and Faxes.
- Now, you have to click on “Add a printer” in order to start “Add Printer Wizard” and further click on “Next” button.
- Verify local printer attached to your computer box, further uncheck “Automatically detect”and “Install my Plug and Play printer” box and then you have to click on “Next” button.
- Afterward, you need to choose the FILE in the “Use the following port”.
- Then click “Have Disk” button.
- Now, you need to browse to the CD drive where the printer installation CD is inserted earlier and then click “OK” button.
- Follow the onscreen instructions for further preferences.
- Eventually, you need to click the “Finish” button and enable the driver to install as shown below.
For more help and support, you can contact our support service via HP Tech Support Number +1-800-462-5143 over which you will get instant support. Our team of IT professionals and technicians are available here round the clock therefore you can connect with our help desk anytime from anywhere. In case you have any query or doubt, you can directly contact HP official support.
No comments:
Post a Comment